[cisco-voip] translation-rule on dialpeer for International calls to set plan=isnd type=international

[Jason Aarons (US)]

Users dial 9,011+Number, AT&T doesn't want to see 011 and this circuit has both US Long Distance and International dialing from Houston, TX. This would so much easier if they just took the 011 <grin> and I could set it at port level.

At the dial-peer level I need to set the plan/type, but I know my rule below isn't correct as we don't pass 011 to provider just the Country Code+City+Number.

voice translation-rule 101
rule 1 /\(.*\)/ /011\1/ type international international
!
!
!
voice translation-profile setintl
translate called 101
!
dial-peer voice 30 pots
description International Dialing
translation-profile outgoing setintl
destination-pattern 9011T
direct-inward-dial
port 0/2/0:23



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100621/df165ec3/attachment.html>