[cisco-voip] How do I migrate users off CUCMBE to full version ?

[Eric Butcher]

The restore would fail if you tried to do it that way.  I have tried.  I strongly suggest doing a full export via bat, restoring to a lab box, and checking what fails and why.  Then build a procedure on what you have to configure before importing the exported data.  Once you have that in place, and have successfully imported into a lab CUCM without losing data or configuration, do it in production.

I have done it in the past and had good results.

Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
C 317.569.4282 - IP Phone
  765.744.1458 - Mobile
  eric.butcher at cdw.com
www.cdw.com
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Loraditch
Sent: Friday, June 25, 2010 8:56 AM
To: Gregory wenzel; lelio at uoguelph.ca
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] How do I migrate users off CUCMBE to full version ?

You can't restore a CUCMBE backup to CUCM it will give you an error about mismatched products Now It gets that info from an xml file that is with the backups and I'd bet you could modify that and make it work but I didn't try that and I'd still be worried about some of the database stuff because of the links that BE has between the two products


Matthew Loraditch, CCVP, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
support at heliontechnologies.com
(p) (410) 252-8830
(F) (443) 541-1593

Visit us at www.heliontechnologies.com
Support Issue? Email support at heliontechnologies.com for fast assistance!


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory wenzel
Sent: Friday, June 25, 2010 8:51 AM
To: lelio at uoguelph.ca
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] How do I migrate users off CUCMBE to full version ?

I will post if cucmbe to cucm works and prodeedure....thanks lelio

-----Original Message-----
From: lelio at uoguelph.ca
Sent: Thursday, June 24, 2010 7:02 PM
To: Gregory Wenzel <gwenzit at gmail.com>
Cc: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] How do I migrate users off CUCMBE to full version ?

It seems like you should be able to use COBRAS to backup/restore most of the settings for connection.

http://ciscounitytools.com/Applications/General/COBRAS/Help/COBRAS.htm#_Toc260901092

It would be interesting to see if you can restore to a standalone CUCM installation. You'll need the exact same version installed on the stand alone server.



…
Don't look at me, my iPod maid that spilling mistake.

On 2010-06-24, at 6:55 PM, Gregory Wenzel <gwenzit at gmail.com> wrote:

> I have a customer that wants to go with full version cucm is there any 
> way to get full config off of cucmbe and onto cucm as well as unity 
> into full unity connection ?]
>
> PDI has no answers
>
> Does Cisco have a migration anywhere or do I have to do a bat and a 
> complete rebuild?
>
> TIA
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip