[cisco-voip] Handsfree speaker phone for PLAR use in a lobby-- Viking E-30

[Justin Steinberg]

I'ved used the Bogen ADP1, which looks very similiar, with a VG224.  I'd bet
the Viking would work too.

On Mon, Jun 28, 2010 at 1:58 PM, Tim Reimers <treimers at ashevillenc.gov>wrote:

>
> Hi folks --
>
> Has anyone used a Viking Electronics E-30 handsfree speakerphone on a Cisco
> VG-224 or ATA?
>
> *http://www.vikingelectronics.com/products/pdf/e-30.pdf*<http://www.vikingelectronics.com/products/pdf/e-30.pdf>
>
> On the documentation, I read this:
> "*CAUTION - 1 When installing on an analog extension of a phone system:*
> *Some phone systems do not conform to analog telecom standards and might*
> *not be compatible with the E-30 speaker phones."*
>
> So I figured one quick way was to just ask if anyone on the forum has used
> one of these-
>
> I need to replace a phone in a lobby that does PLAR (via the UCM
> 7.02.20000) with this device, which is a lot more hardened to abuse.
>
> It would also be able to dial by itself, which would be nice, as it would
> remove some complexity from our system.
>
> Has anyone got experience with these devices from Viking on your systems?
>
> Or, recommendations for another manufacturer/model to use in place of this?
>
> Tim Reimers
> Systems Analyst II
> Information Technology Services
> City of Asheville
> 70 Court Plaza
> Asheville, NC 28801
> phone - 828-259-5512
> *treimers at ashevillenc.gov* <timreimers at ashevillenc.gov>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100630/b77ecca1/attachment.html>