[cisco-voip] ether switch modules on 3900 not coming on line

[Lelio Fulgenzi]

close! 

you need a "no boot manual" in the switch global configuration setting. 

for some reason, it comes defaulted to boot manually? weird. 

and, with these things, the boot settings are not in the 'show startup/running config'. which had me stumped. it's in 'show boot' 


----- Original Message ----- 
From: "Ted Nugent" <tednugent73 at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Friday, March 12, 2010 1:56:01 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] ether switch modules on 3900 not coming on line 

Give this a shot? 


Using the boot manual global configuration command, the module can be booted separately from the router 



On Fri, Mar 12, 2010 at 10:49 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 




OK, I'm sure I'm missing something simple, but when I boot my 3945 I get the following error: 

ilpm_fault-5-ilpm_warning: ether switch network modules with poe support need to be reloaded to function properly 

I have no idea how to reload this thing. And reloading the router doesn't help. 

I'm hunting down for some documentation (go figure) as a starting point, but just thought someone might have gone down this path before. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100312/1b73f027/attachment.html>