[cisco-voip] FXO ports and registering with CCM

[Lelio Fulgenzi]

cool. i'll try that debug.... 

i tried a debug TFTP and all i got was TFTP attempts, nothing else. 

this will hopefully confirm that it is indeed a TFTP issue. at least i can start with that. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Erick B." <erickbee at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "cisco-voip voyp list" <cisco-voip at puck.nether.net> 
Sent: Saturday, March 27, 2010 10:42:20 PM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] FXO ports and registering with CCM 

Try doing a debug ccm-manager config-download and see if you can 
notice a problem with the commands being applied, etc. Usually it 
lists the bad commands in the show ccm output but looks like nothing 
is in that part of output you posted. 

The CUCM having an IP address listed for the ports indicates these 
ports were registered at some point recently.... 


On Sat, Mar 27, 2010 at 7:27 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote: 
> I've finished configuring a couple of FXO port (with Ground Start) and CUCM 
> has an IP address for the ports, but they're not registered yet. I have put 
> the appropriate MGCP and ccm-manager commands based on another router and 
> CCO documents. 
> 
> I have two questions: 
> 
> should these ports register unplugged or do I have to plug in the trunk line 
> before they will register? 
> I noticed some TFTP errors on the MGCP status, I'm thinking that's not good 
> (see below config) 
> 
> ________________________________ 
> ! 
> voice-port 0/2/0 
> signal groundStart 
> ! 
> voice-port 0/2/1 
> signal groundStart 
> ! 
> ccm-manager fallback-mgcp 
> ccm-manager mgcp 
> ccm-manager config server 10.104.91.105 
> ccm-manager config 
> ! 
> mgcp 
> mgcp call-agent 10.104.91.105 2427 service-type mgcp version 0.1 
> mgcp fax t38 ecm 
> mgcp bind control source-interface Loopback104 
> mgcp bind media source-interface Loopback104 
> mgcp behavior g729-variants static-pt 
> ! 
> mgcp profile default 
> ! 
> dial-peer voice 9020 pots 
> service mgcpapp 
> port 0/2/0 
> ! 
> dial-peer voice 9021 pots 
> service mgcpapp 
> port 0/2/1 
> ! 
> ________________________________ 
> vgw-jnhn-a#show ccm-manager config-download 
> Configuration Auto-Download Information 
> ======================================= 
> No configurations downloaded 
> Current state: Downloading XML file 
> Configuration Download statistics: 
> Download Attempted : 1 
> Download Successful : 0 
> Download Failed : 0 
> TFTP Download Failed : 3 
> Configuration Attempted : 0 
> Configuration Successful : 0 
> Configuration Failed(Parsing): 0 
> Configuration Failed(config) : 0 
> Last config download command: 
> Configuration Error History: 
> ________________________________ 
> --- 
> Lelio Fulgenzi, B.A. 
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
> Cooking with unix is easy. You just sed it and forget it. 
> - LFJ (with apologies to Mr. Popeil) 
> 
> 
> _______________________________________________ 
> cisco-voip mailing list 
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100327/7e5fb9ba/attachment.html>