[cisco-voip] Beep?

[Chris Ward (chrward)]

CUCM and the 79XX phones (except 40s and 60s I think) offer monitoring
and recording and tone options:

 

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/admin/7_1_2/c
cmfeat/fsmr.html#wp1060125

 

+Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lisa Notarianni
Sent: Tuesday, March 30, 2010 9:53 AM
Cc: Cisco Voip
Subject: [cisco-voip] Beep?

 

We are in the process of implementing a recording device in our Public
Safety Department.  This will replace an old system that was used with
POTS lines only.

We have CUCM 7.1.2 with 79xx phones.  Eight VoIP phones in Public Safety
will each have only 2 lines on each of the 6 buttons that need to be
recorded.

We know that we can place a coupler on each phone to play the Pa state
required beep tone.  Anyone familiar with any other way to play a beep
tone - only for the lines that are going to be recorded?  If we place
the coupler on the handset the beep will play for all lines - even those
not recorded. We would like to avoid the beep for lines not being
recorded if possible.

Thanks....Lisa

-- 
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100330/cbc17aa7/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 8416 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100330/cbc17aa7/attachment.jpe>