[cisco-voip] VWIC2-2MFT-T1/E1

[Jim McBurnett]

Bill,
This will work fine..
Remember the bug is that you can't pull 2 different clocks from 2 different providers..
If you are providing the clocking on one port as local source or internal source.. and then clocking external on the other port ---all is good..

If Sprint is in one port and AT&T in the other-this is where you will have issues if you are trying to  receive clocking from both...

Later,
Jim

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill
Sent: Monday, May 03, 2010 2:05 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VWIC2-2MFT-T1/E1


Is there still an issue where I can not have two different clocking sources from two different providers on the same two port card? One of the ports is used as a PRI connection to a Nortel box where I am acting as the TELCO. I want to use the other port as a local PRI to the PSTN. Should I split this on two different cards?


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100503/66d86bce/attachment.html>