[cisco-voip] CUCM 7 Send busy signal if number not configured

[Ryan Ratliff]

What do they hear?  4.2(3) had annunciator so unless you changed something around that media resource you should be getting a disconnect cause of unallocated/unassigned number sent back to the gateway, and from there along to the telco.

-Ryan

On May 8, 2010, at 5:17 AM, Reto Gassmann wrote:

> Hello group
> 
> last night we updated our cucm cluster to Version 7.1(3a).
> Now we run into the problem, that calls from the PSTN (3750 with PRI Interfaces connect to the CUCM with h.323) to a unknown number don't get the busy signal. The 4.2(3) Cluster did exactly that.
> Has anyone an idea how we could fix that?
> 
> Thanks Reto
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip