[cisco-voip] CUCM 7 Send busy signal if number not configured

[Cheng, Karen]

Make sure you have an annunciator configured and also a MTP. They both need to be part of the media resource list associated with the device pool/phones/gateways.

Hope that helps.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Sunday, 9 May 2010 10:29 AM
To: Reto Gassmann
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 7 Send busy signal if number not configured

What do they hear?  4.2(3) had annunciator so unless you changed something around that media resource you should be getting a disconnect cause of unallocated/unassigned number sent back to the gateway, and from there along to the telco.

-Ryan

On May 8, 2010, at 5:17 AM, Reto Gassmann wrote:

> Hello group
>
> last night we updated our cucm cluster to Version 7.1(3a).
> Now we run into the problem, that calls from the PSTN (3750 with PRI Interfaces connect to the CUCM with h.323) to a unknown number don't get the busy signal. The 4.2(3) Cluster did exactly that.
> Has anyone an idea how we could fix that?
>
> Thanks Reto
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


Plan ahead these school holidays with RACQ's online trip planner - and don't forget to pack Ultra Care for additional travel benefits following a breakdown. Some conditions apply. Visit http://www.racq.com.au for details.

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.