[cisco-voip] Firmware Load Information page

[Matthew Saskin]

That report only shows phones that have a non-default load set at the phone
level.  It doesn't have anything to do with that firmware phones are
running, only what CUCM has them configured to run.

Matthew Saskin
msaskin at gmail.com
203-253-9571

July 18, 2010 - 1500m swim (in the hudson), 40k bike, 10k run
Please support the Leukemia & Lyphoma Society
http://pages.teamintraining.org/nyc/nyctri10/msaskin


On Mon, May 24, 2010 at 10:00 AM, Ed Leatherman <ealeatherman at gmail.com>wrote:

> Happy Monday,
>
> Does anyone know how the "Device Not Using Default Load" is determined
> in the Firmware Load Information page on CUCM 6.1?
>
> I just loaded new firmware for 7961's a few weeks ago but haven't
> reset many phones since then, so I expected a large number of them
> would still be running the older version. According to this page
> however, none of them are running anything other than the default
> firmware. Just checking a few phones I identified several that are
> running the old version still.
>
> Is there some operation or mechanic in CUCM that refreshes or updates
> this page when a firmware default is changed? Or am I misunderstanding
> what this page is supposed to be telling me?
>
> --
> Ed Leatherman
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100524/8d54013d/attachment.html>