[cisco-voip] Outbound Dial Peer Preference Reliability

[Nate VanMaren]

I like trunk groups, instead of duplicate dial-peers for most things.

You can set a preference for each member of the trunk group.

-Nate

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jim Reed
Sent: Wednesday, May 26, 2010 10:49 AM
To: cisco-voip voyp list
Subject: [cisco-voip] Outbound Dial Peer Preference Reliability

How religiously does the Cisco IOS follow outbound dial-peer preference
configuration?  I have two (2) PRIs -- one (1) to be the preferred PRI for
outbound calls and the other to be the preferred PRI for inbound calls.
However, in the unlikely event that all twenty-three (23) channels of the
outbound PRI are in use, it is my intent to configure duplicate voice dial
peers for the other PRI and set the preference at 1 on those voice dial
peers.  By default, the main inbound PRI preference will be 0.  Just
wondering how religiously the IOS follows those preference settings.

Thank You...
-- 
Jim Reed
Manager of Technical Services
Swift Communications, Inc.
970-384-9141 (Direct)
775-772-7666 (Cell)



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.