[cisco-voip] international calling ... preemption
Ted Nugent
tednugent73 at gmail.com
Thu May 27 12:58:04 EDT 2010
Try this
voice translation-rule 1
rule 1 // // type any international plan any isdn
!
voice translation-profile international
translate called 1
dial-peer voice 1 pots
translation-profile outgoing international
destination-pattern 8011T
Port 0/0/0:23
On Thu, May 27, 2010 at 11:47 AM, Madziarczyk, Jonathan <
JMad at cityofevanston.org> wrote:
> So I’m trying to set up some basic international calling on my H323
> gateway. But I’m getting a preemption error in my Q931 debugs and a fast
> busy on the phone. Is the problem on the Gateway or on the PSTN side, and
> how can I tell?
>
>
>
> Dial-peer voice 1 pots
>
> Destination-pattern 9011…......... (12 periods)
>
> Direct-inward-dial
>
> Port 0/0/0 :23
>
>
>
> My Q931 looks something like this :
>
> May 27 15:04:24.818: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref =
> 0x0090
>
> Bearer Capability i = 0x8090A2
>
> Standard = CCITT
>
> Transfer Capability = Speech
>
> Transfer Mode = Circuit
>
> Transfer Rate = 64 kbit/s
>
> Channel ID i = 0xA98397
>
> Exclusive, Channel 23
>
> Calling Party Number i = 0x2181, 'mynumber'
>
> Plan:ISDN, Type:National
>
> Called Party Number i = 0x91, '011442074999000'
>
> Plan:ISDN, Type:International
>
> May 27 15:04:24.878: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x8090
>
> Cause i = 0xC088 – Preemption
>
>
>
> Ideas?
>
>
>
> JM
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100527/2f4d325d/attachment.html>
More information about the cisco-voip
mailing list