[cisco-voip] pauses in dialing strings supported in CallManager v7?

[Lelio Fulgenzi]

ok. i'm just a little confused by this. 

are we saying that native CallManager FAC/CMC won't work with en-bloc dialing enabled? 

also, what do they mean by "insert digits when directory dialing" ? randomly? or only when you press the key pad during dialing? meaning you can interrupt the dial string. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Wes Sisk" <wsisk at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "voyp list" <cisco-voip at puck.nether.net> 
Sent: Tuesday, November 2, 2010 4:11:17 PM 
Subject: Re: [cisco-voip] pauses in dialing strings supported in CallManager v7? 

Lelio, 

I believe that detail was specific to CM's native implementation of FAC/CMC. When going out to PSTN it is typically a matter of placing the call with out of band digits and then providing the code via inband digits. 

Enbloc dialing is faster and less susceptible to error. Digit at a time allows problems such as: 
CSCso95186 Third generation phones insert digits when directory dialing 

I also updated the Release-note so we can all find this faster next time. 

/Wes 

Lelio Fulgenzi wrote: 


Thanks Wes! 

I see that the bug says a work around is to press the speaker first, then enter the number, which makes sense. But the firmware release notes says CMC and FAC does not work at all. :( 

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp166339 

Is there any benefit to enbloc dialing? 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



From: "Wes Sisk" <wsisk at cisco.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: "voyp list" <cisco-voip at puck.nether.net> 
Sent: Tuesday, November 2, 2010 3:44:46 PM 
Subject: Re: [cisco-voip] pauses in dialing strings supported in CallManager v7? 

I believe pauses are an outstanding feature request. There have been workarounds on H.323 gateways. 

For 40/60v42/62 I believe the difference is going to be enbloc dialing. 42/62 switched to enbloc dialing where 40/60 always uses digit-at-a-time. 

For some background see: 
CSCsw54967 en-bloc dialing for FAC not working 

/Wes 

Lelio Fulgenzi wrote: 


i'm sure v8.7 can do magic, but i'm just wondering about CallManager v7 ? 

we have a corporate directory that includes extensions. 

i just noticed that the 7942/62 balks when trying to dial this string of full numbers, but the 7940/60 work just fine. 

thoughts? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



_______________________________________________
cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101102/c584a7d7/attachment.html>