[cisco-voip] SNR and callerID

[Ryan Ratliff]

What version of CUCM are you on?  Putting the internal phone's number into the RDNIS or SIP diversion header was implemented specifically for providers to allow this and retain the ability to bill appropriately but obviously requires them to support the feature as well.

-Ryan

On Oct 15, 2010, at 12:46 PM, David Roberts wrote:

Hi,
 We just implemented single number reach and, although it's working, I'm forced to have the IP Phone's callerID to be used instead of the original caller because our provider (Covad) won't accept any numbers outside of our calling domain.  I've heard you can set this Redirect IE Outbound flag but that hasn't helped.  We have a pseudo MGCP PRI (connected to a SIP device->Covad) in case that makes a difference.  

Has anyone had any success in getting the originating caller's callerID to be presented?  I think the same problem exists for basic callforwarding as well. 

Thanks

-- 
Please consider not printing this email.  Recycling 1 piece of paper reduces carbon emissions by 100g.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101015/e98aa2bd/attachment.html>