[cisco-voip] CUCM V8 Raid array configuration

[Bill]

You don't get to make that choice. There should only be two drives in the
system. 

 

  _____  

From: James Edmondson [mailto:biged7600 at gmail.com] 
Sent: Thursday, October 21, 2010 1:27 PM
To: Dennis Heim
Cc: Bill; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM V8 Raid array configuration

 

Bill,
I wanted to utilize the 4 hard drives i have for this server, and use a Raid
5, however once that is configured via the HP Raid Array, i insert the CUCM
V8 Install disk and it immediately changes the array back to Raid 0+1 and
only 2 drives, the other two drives are unassigned.  

Dennis,
Yes the model is on the supported hardware list, its an MCS 7835H2, just re
read the Data sheet and it says only supports raid 1. 





On Thu, Oct 21, 2010 at 12:51 PM, Dennis Heim <Dennis.Heim at cdw.com> wrote:

Is your model on the supported hardware list?

 

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office/Home Office
317.569.4201 Fax
317.694.6070 Cell

dennis.heim at cdw.com
cdw.com/content/solutions/unified-communications/
<http://www.cdw.com/content/solutions/unified-communications/> 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bill
Sent: Thursday, October 21, 2010 12:51 PM
To: 'James Edmondson'; cisco-voip at puck.nether.net


Subject: Re: [cisco-voip] CUCM V8 Raid array configuration

 

I don't understand your question. The software configures the drives based
on the install script. You should not need to modify anything. 

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Edmondson
Sent: Thursday, October 21, 2010 12:40 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM V8 Raid array configuration

 

Anyone tell me why cucm v8 only let's you install raid 0+1 with 2 hard
drives?  I have an mcs 7835 with 8 bays for drives, unity connection
install is the same way why !?!? Any help around this road block is much
appreciated.

James




-- 
James

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101021/b8613b62/attachment.html>