[cisco-voip] RFQ for SIP

[Craig Staffin]

Neal,

Fax support T.38
G711 and G729 support
SIP TCP or UDP support
Allow for mid call codec negotiation
Site redundancy in CUBE routers is a must if possible

I would honestly take a look at Global Crossing.  I have worked with all of
the major carriers with SIP and so far they are the only ones that seem to
"get it" and have their act together.



On Fri, Oct 22, 2010 at 1:07 PM, Haas, Neal <nhaas at co.fresno.ca.us> wrote:

> We want to go to SIP instead of our PRI’s, anyone have a RFQ that I can use
> to base our RFQ on? Or have pointers to put into requirements?
>
>
>
> I know that we will require at least 300 talk paths but most likely 450
> talk paths, we are running numbers to figure that out.
>
>
>
> Thank you
>
>
>
> Neal H
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20101022/f2401111/attachment.html>