[cisco-voip] Problems with MGCP Gateway - Busy tone

[BARANOWSKI, Hernan]

Hi all:

 

I have a problem with an MGCP Gateway (2801) with one VIC2-2FXS card.

 

Both ports are registered to the CallManager and has a Directory number configured.

 

When we call from an IP Phone to any of this DNs we heard busy tone. This worked correctly yesterday.

 

When I made a mgcp debug, we obtain the following output:

 

Sep  7 12:06:59: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(380):[lvl=2]socket_set_option returned -1.

Sep  7 12:06:59: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(390):[lvl=2]ERROR: MGCPAPP send_mgcp_msg failure, status -1, errno 13

Sep  7 12:07:03: %LINK-3-UPDOWN: Interface Foreign Exchange Station 0/0/0, changed state to Administrative Shutdown

Sep  7 12:07:03: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x689B8478 pkt->mgcp_parm_lines 0x00000000)

Sep  7 12:07:03: %LINK-3-UPDOWN: Interface Foreign Exchange Station 0/0/0, changed state to up

Sep  7 12:07:03: //-1/xxxxxxxxxxxx/MGCP/mgcp_search_trans_id_rec(1098):[lvl=2]trans id not found. rc = 3.

Sep  7 12:07:03: //-1/xxxxxxxxxxxx/MGCP/mgcp_search_trans_id_rec(1098):[lvl=2]trans id not found. rc = 3.

Sep  7 12:07:03: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x689B8478 pkt->mgcp_parm_lines 0x00000000)

Sep  7 12:07:05: %CMAPP-6-CONFIG_DONE: Configuration by CCM is done

Sep  7 12:07:10: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(380):[lvl=2]socket_set_option returned -1.

Sep  7 12:07:10: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(390):[lvl=2]ERROR: MGCPAPP send_mgcp_msg failure, status -1, errno 13

Sep  7 12:07:11: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x689B8478 pkt->mgcp_parm_lines 0x00000000)

Sep  7 12:07:12: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(380):[lvl=2]socket_set_option returned -1.

Sep  7 12:07:12: //-1/xxxxxxxxxxxx/MGCP/send_mgcp_msg(390):[lvl=2]ERROR: MGCPAPP send_mgcp_msg failure, status -1, errno 13

Sep  7 12:07:13: //-1/xxxxxxxxxxxx/MGCP/mgcp_mp_get_not_entity(830):[lvl=2]Invalid parameter (pkt 0x689B8478 pkt->mgcp_parm_lines 0x00000000)

 

Someone could help me with this problem?

 

Best regards.

 

__________________________________________________________________________________________

 

HERNAN BARANOWSKI
Systems Engineer
 
LOGICALIS
Peru 327 - 1st Floor

C.A.B.A. - Argentina - C1067AAG
Tel/Fax: +54 (11) 4344-0400
hernan.baranowski at la.logicalis.com <mailto:hernan.baranowski at la.logicalis.com> 
www.la.logicalis.com <http://www.la.logicalis.com/> 
www.logicalisnow.com <http://www.logicalisnow.com/> 
 
Por favor, piense en el medioambiente antes de imprimir este email. 
La presente información se envía únicamente para el destinatario, y contiene información de carácter CONFIDENCIAL o PRIVILEGIADA.
La modificación, retransmisión, difusión, copia u otro uso de esta información por cualquier medio, por personas distintas al destinatario, están estrictamente prohibidas.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100907/f56fce6f/attachment.html>