[cisco-voip] 7942/7962 SIP vs SCCP Load (Feature Support by Protocol)

[Jason Aarons (US)]

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7962g_7961g_7961g-ge_7942g_7941g_7941g-ge/8_0/english/administration/guide/62614241apxb.html

This is a pretty good Feature Support by Protocol that shows what works in SIP vs SCCP with CallManager 8.0/Load 9.0(3)(SCCP/SIP).

Customers sometimes ask about SCCP load vs SIP and what still doesn't work in SIP that works in SCCP. I have a couple smaller deployments where we went with G722 and SIP Load with no problems. The switch between SCCP and SIP loads on the newer phones has also worked very well.



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100908/44531b59/attachment.html>