[cisco-voip] FXO and Caller ID

Tue Sep 14 08:12:22 EDT 2010

MGCP with FXO and caller ID works? What CUCM version?

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

From: John.VanLaecke at ghd.com [mailto:John.VanLaecke at ghd.com] 
Sent: Tuesday, September 14, 2010 2:47 AM
To: Ahmed Elnagar
Cc: cisco-voip at puck.nether.net; cisco-voip-bounces at puck.nether.net; Joel
Perez
Subject: Re: [cisco-voip] FXO and Caller ID

Hello, 

I normally configure these as MGCP or SCCP to the call manager and
caller ID works a treat, 

Regards,

John Van Laecke 
Network Administrator 

GHD   Accomplish More Together
T: 61 7 3316 4456 | M:0427 015 232 | V: 414456 | E:
John.vanlaecke at ghd.com
Level 2, 201 Charlotte Street QLD AUSTRALIA | www.ghd.com.au
<http://www.ghd.com.au/_>  

Water <http://www.ghd.com/sectors/water/>  | Energy & Resources
<http://www.ghd.com/global/sectors/energy--resources/>  | Environment
<http://www.ghd.com/sectors/environment/>  | Property & Buildings
<http://www.ghd.com/global/sectors/property--buildings/>  | 
Transportation <http://www.ghd.com/global/sectors/transportation/> 

Please consider the environment before printing this email 

From: 

"Ahmed Elnagar" <ahmed_elnagar at rayacorp.com> 

To: 

"Joel Perez" <tman701 at gmail.com> 

Cc: 

cisco-voip at puck.nether.net 

Date: 

14/09/2010 07:15 AM 

Subject: 

Re: [cisco-voip] FXO and Caller ID 

Sent by: 

cisco-voip-bounces at puck.nether.net

________________________________

Try to use analog phone with Caller ID feature you are sure it is
working and check this line...maybe they are sending the caller ID in a
format that the router don't understand and hence you received the
"Caller ID receive failed" 
The call will never make it to CUCM unless caller ID is received and
there is a command to enable a ring timer after which the router stops
trying to receive the Caller ID and send the call to it destination
without a caller ID "I cannot remember the command right now but if you
checked help under voice port you will find it". 

 Best Regards; 
  Ahmed Elnagar 
  Senior Network PS Engineer 
  Mob: +2019-0016211 
  CCIE#24697 (Voice) 

From: cisco-voip-bounces at puck.nether.net [
mailto:cisco-voip-bounces at puck.nether.net
<mailto:cisco-voip-bounces at puck.nether.net> ] On Behalf Of Joel Perez
Sent: Monday, September 13, 2010 6:50 PM
To: Scott Voll
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FXO and Caller ID 

Sorry, forgot to add that, yes it's an H323 GW. The GW has been up for a
while so im not sure if Caller ID worked correctly or not in the past.
We were just told about this and the troubleshooting below was the first
thing off the top of my head to check.

Joel P. 
On Mon, Sep 13, 2010 at 11:44 AM, Scott Voll <svoll.voip at gmail.com>
wrote: 
I'm assuming your using H323....? 

On Mon, Sep 13, 2010 at 8:10 AM, Ryan Ratliff <rratliff at cisco.com>
wrote: 
If you put an analog phone on one of those lines and call it do you get
caller-id? 

-Ryan 

On Sep 13, 2010, at 9:41 AM, Joel Perez wrote: 

Good Monday morning List.

Im wondering if anyone of you have ran into an issue with caller ID on
FXO ports? The carrier is in Canada and they swear they are sending me
caller ID on 4 lines I have from them going into 4 FXO ports on a 2811
release 12.4.20T4.
I have the calls going to CUCM using Connection Plar (DN). If I enable
caller id on the ports then inbound calls rna and never get to CUCM.
I have tried using CPtone CA, US, none. I have also tried using the
following under the Voice ports:

caller-id alerting pre-ring
caller-id alerting ring (1,2,3,4)
caller-id enable type 1,2

If any of those are enabled the calls rna. The only one that seems to
work somewhat is 
caller-id alerting dsp-pre-alloc 
With that one the call goes thru but im still not getting Caller ID and
I get the following in the debug:

Sep 13 13:13:09.238: htsp_process_event: [0/1/2, FXOGS_ONHOOK,
E_DSP_SIG_0000]fxogs_onhook_ringing
Sep 13 13:13:09.238: htsp_timer_stop
Sep 13 13:13:09.238: htsp_timer - 125 msec
Sep 13 13:13:09.366: htsp_process_event: [0/1/2, FXOGS_WAIT_RING_MIN,
E_HTSP_EVENT_TIMER]fxogs_wait_ring_min_timer
Sep 13 13:13:09.366: htsp_timer - 10000 msec
Sep 13 13:13:11.082: htsp_process_event: [0/1/2, FXOGS_RINGING,
E_DSP_SIG_0100]
Sep 13 13:13:11.082: fxogs_ringing_not:
Sep 13 13:13:11.082: htsp_timer_stop
Sep 13 13:13:11.082: htsp_timer_stop2
Sep 13 13:13:11.082: htsp_timer_stop3 htsp_setup_ind
Sep 13 13:13:11.082: [0/1/2] get_fxo_caller_id:Caller ID receive failed.
parseCallerIDString:no data.   <------- This tells me they arent sending
me Caller ID unless im reading it wrong.

Any help would be appreciated.

Thanks,

Joel P 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message. 
_____________________ 
This e-mail has been scanned for viruses by
MessageLabs._______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
<https://puck.nether.net/mailman/listinfo/cisco-voip> 

_____________________ 
This email and all attachments are confidential. For further important
information about emails sent to or from GHD or if you have received
this email in error, please refer to
http://www.ghd.com/emaildisclaimer.html .
_____________________ 
This e-mail has been scanned for viruses by MessageLabs.

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100914/38360ec3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100914/38360ec3/attachment.jpg>