[cisco-voip] FXO lines in Ukraine

[Saboor Khan]

How you configure the FXO on gateway? what equipment you have, need some
more info

Regards,

Saboor

On Thu, Sep 23, 2010 at 9:50 AM, Louis Koekemoer (ZA) <
Louis.Koekemoer at za.didata.com> wrote:

>  Hi all,
>
>
>
> In Kiev, Ukraine.
>
>
>
> I have 4 analogue lines connected on a 4 port FXO card. When connected to
> the Siemens PABX, all lines can call anywhere. When I connect the lines one
> by one to the same port on the gateway with the same configuration, I have
> only 1 line being able to make only local calls. I plug those lines 1 by one
> on an analog phone, with the setting to pulse, then all of them can also
> call anywhere. It does not make sense that I use the same port for testing
> via the CCM, and only 1 can dial and only local.
>
>
>
> Any advice.
>
>
>
> Regards
>
>
>
> *Louis Koekemoer*
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer"
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100923/1f5bdbe4/attachment.html>