[cisco-voip] FXO lines in Ukraine

Louis Koekemoer (ZA) Louis.Koekemoer at za.didata.com
Thu Sep 23 10:32:23 EDT 2010


It is a SRST site on CUCM 6.X. Done 5 site like this in the last month on the same cluster without any issue like this. I feel there is some delay with the Telco as they using pulse, and not tone.

It is MGCP, and the port configuration looks like this:

voice-port 0/2/1
 cptone C1
 timing hookflash-out 500
 connection plar opx 51400


Regards

Louis Koekemoer
Senior Cisco IPT Systems Engineer
Converged Communications
Dimension Data (South Africa)

Tel:         +27 (11) 575 6560
Fax:        +27 (11) 576 6560
Cell:       +27 (71) 680 8790
Email:    Louis.Koekemoer at za.didata.com<mailto:Louis.Koekemoer at za.didata.com>
Planned Travel - 16/09/2010-15/10/2010
For further information about Dimension Data, please go to www.dimensiondata.com<http://www.dimensiondata.com/>
P Before printing this email please think about the environment
[cid:image001.jpg at 01CB5B3C.6D4AB8D0]<http://www.dimensiondata.com/Lists/Media%20Content/UnifiedCommunicationsandCollaboration_129169163801717500.wmv>

From: Saboor Khan [mailto:saboor.khan at gmail.com]
Sent: 23 September 2010 04:27 PM
To: Louis Koekemoer (ZA)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FXO lines in Ukraine

How you configure the FXO on gateway? what equipment you have, need some more info

Regards,

Saboor
On Thu, Sep 23, 2010 at 9:50 AM, Louis Koekemoer (ZA) <Louis.Koekemoer at za.didata.com<mailto:Louis.Koekemoer at za.didata.com>> wrote:
Hi all,

In Kiev, Ukraine.

I have 4 analogue lines connected on a 4 port FXO card. When connected to the Siemens PABX, all lines can call anywhere. When I connect the lines one by one to the same port on the gateway with the same configuration, I have only 1 line being able to make only local calls. I plug those lines 1 by one on an analog phone, with the setting to pulse, then all of them can also call anywhere. It does not make sense that I use the same port for testing via the CCM, and only 1 can dial and only local.

Any advice.

Regards

Louis Koekemoer

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100923/33e0bd39/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 21069 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100923/33e0bd39/attachment.jpg>


More information about the cisco-voip mailing list