[cisco-voip] FXO lines in Ukraine

[Cristobal Priego]

Louis,

are you running H.323 or MGCP on that gateway ?
if you are running H.323 could you please show your dial peers or just
configure a generic dial peer like

dial-peer voice 9 pots
destination-pattern 9T
trunk group FXO

and let us know the results ?



2010/9/23 Louis Koekemoer (ZA) <Louis.Koekemoer at za.didata.com>

>  Hi all,
>
>
>
> In Kiev, Ukraine.
>
>
>
> I have 4 analogue lines connected on a 4 port FXO card. When connected to
> the Siemens PABX, all lines can call anywhere. When I connect the lines one
> by one to the same port on the gateway with the same configuration, I have
> only 1 line being able to make only local calls. I plug those lines 1 by one
> on an analog phone, with the setting to pulse, then all of them can also
> call anywhere. It does not make sense that I use the same port for testing
> via the CCM, and only 1 can dial and only local.
>
>
>
> Any advice.
>
>
>
> Regards
>
>
>
> *Louis Koekemoer*
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer"
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100924/a2946d6d/attachment.html>