[cisco-voip] FXO lines in Ukraine

Louis Koekemoer (ZA) Louis.Koekemoer at za.didata.com
Sun Sep 26 04:38:07 EDT 2010


Found was I was looking for.

Under FXO ports
Dial-type pulse

But still had issues with lines not able to call anything more than information. We will be pursuing digital lines. Thank you for your suggestions.


Regards

Louis Koekemoer
Senior Cisco IPT Systems Engineer
Converged Communications
Dimension Data (South Africa)

Tel:         +27 (11) 575 6560
Fax:        +27 (11) 576 6560
Cell:       +27 (71) 680 8790
Email:    Louis.Koekemoer at za.didata.com<mailto:Louis.Koekemoer at za.didata.com>
Planned Travel - 16/09/2010-15/10/2010
For further information about Dimension Data, please go to www.dimensiondata.com<http://www.dimensiondata.com/>
P Before printing this email please think about the environment
[cid:image001.jpg at 01CB5CE5.C9E782D0]<http://www.dimensiondata.com/Lists/Media%20Content/UnifiedCommunicationsandCollaboration_129169163801717500.wmv>

From: Cristobal Priego [mailto:cristobalpriego at gmail.com]
Sent: 24 September 2010 04:10 PM
To: Louis Koekemoer (ZA)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] FXO lines in Ukraine

Louis,

are you running H.323 or MGCP on that gateway ?
if you are running H.323 could you please show your dial peers or just configure a generic dial peer like

dial-peer voice 9 pots
destination-pattern 9T
trunk group FXO

and let us know the results ?



2010/9/23 Louis Koekemoer (ZA) <Louis.Koekemoer at za.didata.com<mailto:Louis.Koekemoer at za.didata.com>>
Hi all,

In Kiev, Ukraine.

I have 4 analogue lines connected on a 4 port FXO card. When connected to the Siemens PABX, all lines can call anywhere. When I connect the lines one by one to the same port on the gateway with the same configuration, I have only 1 line being able to make only local calls. I plug those lines 1 by one on an analog phone, with the setting to pulse, then all of them can also call anywhere. It does not make sense that I use the same port for testing via the CCM, and only 1 can dial and only local.

Any advice.

Regards

Louis Koekemoer

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100926/48e67d08/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 21069 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100926/48e67d08/attachment.jpg>


More information about the cisco-voip mailing list