[cisco-voip] FAX in ATA 186 with CUCM

[Lee]

I've found the ATAs are horrible with faxes.

Try using a Cisco SPA8000-G1 - 8-Port IP Telephony Gateway.  It's a SIP
device that I've used on CME.  I've connected faxes and credit card machines
with no issues.

On Wed, Mar 30, 2011 at 10:01 AM, sheref hf <sheref_hf at hotmail.com> wrote:

>  Hi all,
>
> I have CUCM 7.1 with H323 GW .... I have ATA connected with 2 FAXes
>
> I already configured the two ATA ports took IP's and registered with CUCM
> with Directory Numbers : 8012, 8013
>
> MY LAnd Lines that will work as FAX Lines on Ports 0/1/0 and 0/1/1
>
> what is additional configuration to make these two faxes work well ... and
> uses the Faxes PSTN Lines ....?
> the ATA already registered and took DN's .... only
>
> Thanks
>
>
>
>
>
> Best Regards,
>
>
>
> *Sherif Ibrahem Mohamed*
>
> Network Engineer
>
> *Silicon21NIT Services***
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110402/931b9b7d/attachment.html>