[cisco-voip] Unicast MoH nto working out to PSTN

[gha go]

Hi Neil,

try to desable the cef in your configuration i think there re a bug with
2900.

Regard,

Ghassan

2011/4/13 O'Brien, Neil <nobrien at datapac.com>

>  Hi Guys,
>
>
>
> I’m having an odd issue.  I’m unable to get Unicast MoH working for PSTN
> calls.  I’ve got my MoH server in a device pool to control MoH at g729
> between my different sites.  If I configure MMoH and configure the gateway
> to use MTP it seems to work but this has a knock on effect for transferring
> to remote sites over g729.
>
>
>
> Unicast MoH works fine internally.  I have the MoH media resources in an
> MRGL that’s assigned to the phones and H323 gateway.  When I put a PSTN call
> on hold, I get silence (not ToH).  If I do a “show call active voice” I can
> see the packet count increase which would suggest to me that the gateway is
> getting the stream but not passing it on.  The VG is a 2951 with IOS
> 15.0(1)M4
>
>
>
> Is there anything strange with 2900 or IOS 15??  I’ve used the same
> configuration for other sites but they’ve had 2800 with IOS 12X.
>
>
>
> I’m kind of going around in circles at this stage so any pointers would be
> appreciated,
>
> Thanks,
>
> Neil
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
GO
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110423/86d9107e/attachment.html>