[cisco-voip] New to Cisco Voice - Need to Setup Fax

[Jason Gurtz]

The vast majority here is on a hierarchical LAN w/ routing in the access
layer (4507R-E access and 4900M cores) and we're using plain jane
auto-qos. Seems to me like your Metro-E setup is doing just fine. 

I'm not sure about the version question; we are on the latest 8.5.1 so
maybe Lelio can comment?

~JasonG


> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> bounces at puck.nether.net] On Behalf Of Alex Lindsay
> Sent: Thursday, August 04, 2011 08:57
> To: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] New to Cisco Voice - Need to Setup Fax
> 
> What is your network topology look like?  With my MetroE network I'm
> getting about 1-2ms jitter and 2-3ms ping from remote site to data
> center.
> We have very basic QoS setup atm but working on full MPLS with end to
end
> QoS later this year.
> 
> Do you think running IOS 15 with older CME (7.0/4.3) would give me the
> fax speed benefit, or am I looking at an upgrade to 8+?
> 
> My Regards,
> 
> Alexander A. Lindsay
> WaveTech Systems
> http://wavetechs.com
> O: 305.224.1563
> F: 305.865.0622
> C: 305.903.7592
> alex at wavetechs.com
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Gurtz
> Sent: Thursday, August 04, 2011 8:50 AM
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] New to Cisco Voice - Need to Setup Fax
> 
> We have VG224 and 204 in place since all the bizness people are addicted
> to their old fashioned fax. They've worked quite well for us, though we
> had a heck of a time trying to figure out how to set a slower fax speed
> on a Xerox 6180mfpd.
> 
> I was pretty stoked to see the other post saying higher speeds would
work
> with IOS 15; can't wait to try :)
> 
> ~JasonG
> 
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
> > bounces at puck.nether.net] On Behalf Of Alex Lindsay
> > Sent: Thursday, August 04, 2011 08:03
> > To: Baris Gulten
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] New to Cisco Voice - Need to Setup Fax
> >
> > Thanks for all ideas and options but unfortunately I do not have the
> > option of removing every users analog fax machine.   I have to find a
> > reliable solution that will work with ATA's and the PRI I have.
> >
> >
> >
> > My Regards,
> >
> >
> >
> > Alexander A. Lindsay
> >
> > WaveTech Systems
> >
> > http://wavetechs.com <http://wavetechs.com/>
> >
> > O: 305.224.1563
> >
> > F: 305.865.0622
> >
> > C: 305.903.7592
> >
> > alex at wavetechs.com
> >
> >
> >
> > From: Baris Gulten [mailto:barisgulten at gmail.com]
> > Sent: Thursday, August 04, 2011 7:17 AM
> > To: Alex Lindsay
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] New to Cisco Voice - Need to Setup Fax
> >
> >
> >
> > Dude, I'm tryed before Imagicle Stone Fax software with pri lines.
> >
> > Its so usefull.
> >
> > Sent from my iPhone
> >
> >
> > On 03 Ağu 2011, at 17:00, Alex Lindsay <alex at wavetechs.com> wrote:
> >
> > 	Hello,
> >
> >
> >
> > 	I have a small MetroE network and I would like to consolidate my
> > Faxing as I have done with my Voice.  I have a 7200vxr with VXB T1
> > card to connect to my PRI (that I got with the anticipation of fax
> > oIP, to be frank, sucking).  Am starting to use that same PRI for in
> > LATA calls managed by my local SBC but my primary LD is sent to a ITSP
> via SIP.
> >
> >
> >
> > 	My question and thoughts are as follows;  What is the simplest
> > solution to support about 25 Fax attached ATA's (spa8000, spa2102 &
> > Audiocodes MP-2032) to the voice gateway (PRI router)?  I was thinking
> of
> > setting up a Cisco 2821 (that I already have) with a PVDM2-32/64 and
> > CME
> > 4.3/7 with a SIP trunk to the voice gateway.
> >
> >
> >
> > 	Forgive my ignorance.  I am a diehard R&S guy and got through into
> 
> > the Voice world.
> >
> >
> >
> > 	·         Do I need to PVDM2 if I am doing only SIP to SIP?
> >
> > 	·         Does that version of CME support T.38 well or at all?
> >
> > 	·         What is this Fax Relay all about and do I need it? I am
> > reading mixed reviews.
> >
> >
> >
> > 	Thank you for any advice, help or information.
> >
> >
> >
> >
> >
> > 	My Regards,
> >
> >
> >
> > 	Alexander A. Lindsay
> >
> > 	WaveTech Systems
> >
> > 	http://wavetechs.com <http://wavetechs.com/>
> >
> > 	O: 305.224.1563
> >
> > 	F: 305.865.0622
> >
> > 	C: 305.903.7592
> >
> > 	alex at wavetechs.com
> >
> >
> >
> > 	_______________________________________________
> > 	cisco-voip mailing list
> > 	cisco-voip at puck.nether.net
> > 	https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip