[cisco-voip] UCCX HA expectations

[Dennis Heim]

That is pretty much CAD, failover time is pretty long. Within the CCE folks where they have the option of CTI-OS, this is one of the reasons they recommend against cad is the 2 minute+ failover time.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
10610 9th Place
Bellevue, WA 98004

317.569.4255 Single Number Reach
317.569.4201 Fax
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Daniel
Sent: Friday, August 19, 2011 5:16 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] UCCX HA expectations

Hi All,

We're currently testing HA on two new UCCX 8.5.1 boxes. If we pull the network cable out of the primary server the desktop CAD takes more than 3 minutes to recognise this outage and connects to the secondary. During this time of between 3 - 5 minutes the CAD is completely unresponsive, it eventually connects to the secondary and all is good. Also while the primary is down if you start CAD fresh and login it also takes some time. Once we put the network cable back in the fallback to the primary on CAD is instant.

Are these normal results? is this expected?

thanks,

Daniel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110820/0c23c8eb/attachment.html>