[cisco-voip] Moh-live command giving static on MoH feed

[Buchanan, James]

I'd use the Syn-Apps Paging Relay for this. It has a good RCA input and converts the stream to multicast. Much better signal than the E&M port. 

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions 
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com
D: 615-866-5729 | F:615-866-5781  www.presidio.com

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick B.
Sent: Monday, August 29, 2011 11:39 AM
To: voip puck
Subject: [cisco-voip] Moh-live command giving static on MoH feed

Hi,

Anyone ever see brief static inserted into a live multicast MoH feed on a router (CUCM environment). When we take the moh-live command out of the configuration the audio file on the router plays fine. When we unplug the cable going into FXO port with the moh-live command it still does static every 2 minutes or so when the router goes and detects if there is an audio stream on FXO port.

On this topic, is there a better way to do this with a UCS virtual environment (can't use the USB-MOH-AUDIO)?  I wish CUCM had a MoH Playlist you could play multiple audio files with as a audio source option.

Thanks, Erick
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip