[cisco-voip] dial-peer E1 ISDN

[Just Kennie]

Hi All,
I am trying to configure my E1 card for ISDN connectivity for voice traffic,
below is my config...

*controller E1 0/2/0
 framing NO-CRC4
 channel-group 0 timeslots 1-31
!
interface Serial0/2/0:0
 description G703.E1.Connection to Customer
 bandwidth 2048
 no ip address*
*encapp HDLC*
*!*
Now I am trying to configure the Dial-peer, to forward 2123 calls through
the E1 ISDN interface
!
*dial-peer voice 1 pots
destination-pattern 21232
session target port 0/0/0:0*
!
but its my 2811 voice gateway is not allowing the "session target port
0/0/0:0" command, please what should I do to forward my calls through the E1
ISDN interface.



*Cheers,
Idowu Kehinde
TEL: 2348024017748
BB:  30E8E5F9
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110207/d88fdace/attachment.html>