[cisco-voip] dial-peer E1 ISDN

[ccieid1ot]

Session target is for IP based.  Use 'port 0/2/0:0' instead.

duy
ccie #27737 voice

tmobile g2
On Feb 7, 2011 12:02 PM, "Just Kennie" <justkennie at gmail.com> wrote:
> Hi All,
> I am trying to configure my E1 card for ISDN connectivity for voice
traffic,
> below is my config...
>
> *controller E1 0/2/0
> framing NO-CRC4
> channel-group 0 timeslots 1-31
> !
> interface Serial0/2/0:0
> description G703.E1.Connection to Customer
> bandwidth 2048
> no ip address*
> *encapp HDLC*
> *!*
> Now I am trying to configure the Dial-peer, to forward 2123 calls through
> the E1 ISDN interface
> !
> *dial-peer voice 1 pots
> destination-pattern 21232
> session target port 0/0/0:0*
> !
> but its my 2811 voice gateway is not allowing the "session target port
> 0/0/0:0" command, please what should I do to forward my calls through the
E1
> ISDN interface.
>
>
>
> *Cheers,
> Idowu Kehinde
> TEL: 2348024017748
> BB: 30E8E5F9
> *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110207/6416bfa1/attachment.html>