[cisco-voip] Cisco ATA187 and Valcom 9940

[Tim Frazee]

I recommend the same. Unfortunately, I dont have that choice with this case.

I've had really good luck with ata186s and 9940s. works great everytime.


On Thu, Feb 10, 2011 at 9:44 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

> This is why I recommend FXO over FXS and not to use the Valcom 99XX. Stick
> with FXO and Valcom 200X.
>
>
>
> Your problem is with (lack of) disconnect supervision, I was never able to
> fix it with SCCP ATA and CallManager.  Oddly the ATA supervisory disconnect
> behaves differently with CME/SCCP ATA.
>
>
>
> Search the archives for my name and valcom or disconnect.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Tim Frazee
> *Sent:* Thursday, February 10, 2011 10:08 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Cisco ATA187 and Valcom 9940
>
>
>
> group,
>
>
>
> I have an ATA187 with a Valcom 9940. When the caller makes a call to the
> 187, the Valcom answers and the page is made. When the ip phone caller hangs
> up the call, the 187 stays off hook. This results in a fast busy being
> played out over the Valcom 9940.
>
>
>
> The behavior of an ata186 in the same setup is different. When the ip phone
> caller goes on-hook, so does the ata186.
>
>
>
> I see some options on the ata187 to change, but some mild
> tweaking didn't change any behavior.
>
>
>
> I am running ata187 load sip 9.0(3) with UCM 7.1(5b)SU2.
>
>
>
> Any ideas?
>
> ------------------------------
>
> [image: DDIPT] <http://dimensiondata.stream57.com/04141pm/>
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110210/ab86a26d/attachment.html>