[cisco-voip] can't get Unity Connection 7.1.3ES11 to register to CUCM v7.1.5b(SU2)

[Lelio Fulgenzi]

I'm having problems getting Unity Connection 7.1.3ES11 voice mail ports to register to CUCM v7.1.5b(SU2). I've created the phone system, phone port groups and added the ports and all looks good, but they don't show as registered on the CallManager server. 

As background, I've imported a DMA from my 4.1(3) server into my 7.1.5b server, so all the voice mail port names and extensions are the same. I don't see this as being an issue though, since Connection is pointing at a different IP address. 

The Unity Connection server and v7 CallManager server are on the same VLAN so there should be no ACL issues at hand. I tried a few restarts but no luck. 

Ideas before I open a TAC case? This stuff has always been simple. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110124/9e0ad4e9/attachment.html>