[cisco-voip] CUCM 8.5 and CUMA

[Ahmed Elnagar]

Thanks Ryan..great information; as usual J.

 

Best Regards,

Ahmed Elnagar | CCIE#24697 Voice

 

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Thursday, January 27, 2011 12:44 AM
To: Ahmed Elnagar
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] CUCM 8.5 and CUMA

 

The deployment guide for Cisco Mobile 8 just recently posted.  It has a
section specifically on why to use one version over the other.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7290/ps7271/
deployment_guide_c07-641141.html

 

-Ryan

 

On Jan 25, 2011, at 8:33 AM, Ahmed Elnagar wrote:





I am giving it a lab test soon.

 

I have read in the features and services guide for CUCM 8.5 "the first
version that should replace the CUMA" is that CUMC can now register
directly to CUCM without the need for CUMA server...however what about
connectivity...the document say that CUMC uses single port to
communicate to CUCM...then what should I do? Just do a static entry on
the firewall to forward requests on this port to CUCM?...I don't think
that will be a good idea and a lot of big enterprise will defiantly
refuse this approach.

 

Unlike CUMA...you setup the ASA as a proxy server with certificate
authentication of the client "CUMC"...is the same doable with CUMC?

 

Best Regards,

Ahmed Elnagar | CCIE#24697 Voice

 

From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Monday, January 24, 2011 11:08 PM
To: Ahmed Elnagar
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] CUCM 8.5 and CUMA

 

The SRND has be the best run-down of the differences.  Check out the
"Mobility Beyond the Enterprise" section, specifically the difference in
the dual-mode clients and CUMC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/mobilapp.html
#wp1082858

 

It really comes down to what phone you have, what version of the
mobility client, and what CUCM version you have.  

 

-Ryan

 

On Jan 21, 2011, at 6:08 PM, Ahmed Elnagar wrote:






Dear all;

 

It have been said here before that starting CUCM 8.5 a CUMA server is no
longer required, can anyone shade some light on how the design will look
like? How the CUMC client on the phone connects and get its
information...will ASA be required or not??

 

I think this topic is causing a lot of confusing...if anyone has a
document that clearly explains how this replacement is achieved.

 

Best Regards,

Ahmed Elnagar | CCIE#24697 Voice

 

Raya IT - Professional Networking Services

Mobile    : +20190016211

Tel          : +20238276000 Ext. 2475

Fax         : +20238372930

Email      : ahmed_elnagar at rayacorp.com
Address : El Motamayez District - 6th of October

<image001.jpg>

 

 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message. _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message.

 

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110127/7095ec8e/attachment.html>