[cisco-voip] Disabling CallManager's software MTP to allow routers software MTP to be used?

[Buchanan, James]

One more thing: if you put all the MTPs in the SAME MRG, you will not be able to control which MTP is in use. You must use a different MRG for the router MRG, and need to put that MRG first in the list in your MRGL.

Thanks,

James Buchanan| UC Technology Manager | Presidio South | Presidio Networked Solutions
12 Cadillac Dr Ste 130 Brentwood, TN 37027 | jbuchanan at presidio.com<mailto:jbuchanan at presidio.com>
D: 615-866-5729 | F:615-866-5781  www.presidio.com<http://www.presidio.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward (chrward)
Sent: Friday, July 08, 2011 8:48 AM
To: Jason Aarons (AM); cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Disabling CallManager's software MTP to allow routers software MTP to be used?

I suspect it's a still an MRGL/MRG issue, but make sure you place all the MTPs in an MRG. Any devices not in an MRG will still be available in a "default" list for use. Placing them in an MRG (you don't have to place this MRG in an MRGL) will remove them from the default list.

+Chris
Hosted Collaboration Solution TME

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Friday, July 08, 2011 9:42 AM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] Disabling CallManager's software MTP to allow routers software MTP to be used?

CallManager 8.0(3)

I enabled the  IOS Software MTP on 3945 Gateway and Registered it to CallManager, setup custom MRG/MRGL for that gateway to use that MRGL.

Investigating, as it appears the CallManager server's software MTP is still providing the MTP versus the router CPU.                                                                                                                                                                                                                                                         .

JDCVXMLGWP01#show dspfarm profile 1
Dspfarm Profile Configuration

Profile ID = 1, Service = MTP, Resource ID = 1
Profile Description :
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : NONE   Status : NONE
Number of Resource Configured : 500
Number of Resource Available : 500
Hardware Configured Resources : 0
Hardware Available Resources : 0
Software Resources : 500
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
JDCVXMLGWP01#

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110708/4aa055c4/attachment.html>