[cisco-voip] CLID/Translation help

[jaystants@rogers.com]

Now will this have to be applied to a dial-peer? Can i create a new outbound dial-peer or should it be applied to the existing outbound peer to the voip provider? 

Jay Stants

Sent from my Thunderbolt 4G LTE


----- Reply message -----
From: "ccieid1ot" <ccieid1ot at gmail.com>
To: "Jay Stants" <jaystants at rogers.com>
Cc: <cisco-voip at puck.nether.net>
Subject: [cisco-voip] CLID/Translation help
Date: Tue, Jul 12, 2011 1:00 pm
Create another translation rule to match your internal number then with your full e164 number.  You would then create a translation profile using calling.
Ex
Voice translation-rule 2

Rule 1 /4.../ /9722404\(.*\)/
Voice translation-profile CLID

Translate calling 2
On Jul 12, 2011 7:08 AM, "Jay Stants" <jaystants at rogers.com> wrote:> Good day everyone, 
> 
> Need a little help with configuring outbound caller ID. I've tried a few things 

> but i'm missing something in my tanslations that seems to break outbound dialing 
> when i change the current translation rule. I want to present my DID on outbound 
> calls instead of having whatever number that ITSP routes from presented. Any 

> help is much appreciated.
> 
> This is what i have currently.
> 
> voice translation-rule 1
>  rule 1 /^9/ //
>  
> voice translation-profile voip.ms

>  translate called 1
> dial-peer voice 1 voip
>  description **SIP Trunk to newyork.voip.ms**
>  translation-profile outgoing voip.ms

>  destination-pattern 9[2-9].[2-9].......
>  session protocol sipv2
>  session target dns:newyork.voip.ms
>  dtmf-relay rtp-nte sip-notify
>  codec g711ulaw

>  no vad
> !
> dial-peer voice 2 voip
>  description **Incoming SIP Trunk - Voip.ms**
>  translation-profile incoming voip.ms
>  session protocol sipv2
>  session target ipv4:10.50.1.2

>  incoming called-number 5856786019
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
> !
> dial-peer voice 20 pots
>  destination-pattern 5.T
>  direct-inward-dial
>  no sip-register

> !
> telephony-service
>  max-ephones 10
>  max-dn 10
>  ip source-address 10.50.1.2 port 2000
>  system message Cisco CME 8.1
>  cnf-file location flash:
>  cnf-file perphone

>  time-zone 12
>  max-conferences 8 gain -6
>  dn-webedit
>  time-webedit
>  transfer-system full-consult
>  secondary-dialtone 9
>  create cnf-files version-stamp Jan 01 2002 00:00:00

> 
> ephone-dn  1  dual-line
>  number 4005 no-reg primary
> 
> ephone  1
>  device-security-mode none
>  mac-address 001E.7AC5.896A
>  type 7961GE
>  button  1:1
> 

>  
> Regards,
> Jay Stants
> jaystants at rogers.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110712/340e5690/attachment.html>