[cisco-voip] CLID/Translation help

[ccieid1ot]

Just apply the new rule to an existing translation-profile.

On Tue, Jul 12, 2011 at 12:18 PM, jaystants at rogers.com <jaystants at rogers.com
> wrote:

> Now will this have to be applied to a dial-peer? Can i create a new
> outbound dial-peer or should it be applied to the existing outbound peer to
> the voip provider?
>
> Jay Stants
>
> Sent from my Thunderbolt 4G LTE
>
>
>
> ----- Reply message -----
> From: "ccieid1ot" <ccieid1ot at gmail.com>
> To: "Jay Stants" <jaystants at rogers.com>
> Cc: <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] CLID/Translation help
> Date: Tue, Jul 12, 2011 1:00 pm
>
>
> Create another translation rule to match your internal number then with
> your full e164 number.  You would then create a translation profile using
> calling.
>
> Ex
>
> Voice translation-rule 2
> Rule 1 /4.../ /9722404\(.*\)/
>
> Voice translation-profile CLID
> Translate calling 2
> On Jul 12, 2011 7:08 AM, "Jay Stants" <jaystants at rogers.com> wrote:
> > Good day everyone,
> >
> > Need a little help with configuring outbound caller ID. I've tried a few
> things
> > but i'm missing something in my tanslations that seems to break outbound
> dialing
> > when i change the current translation rule. I want to present my DID on
> outbound
> > calls instead of having whatever number that ITSP routes from presented.
> Any
> > help is much appreciated.
> >
> > This is what i have currently.
> >
> > voice translation-rule 1
> >  rule 1 /^9/ //
> >
> > voice translation-profile voip.ms
> >  translate called 1
> > dial-peer voice 1 voip
> >  description **SIP Trunk to newyork.voip.ms**
> >  translation-profile outgoing voip.ms
> >  destination-pattern 9[2-9].[2-9].......
> >  session protocol sipv2
> >  session target dns:newyork.voip.ms
> >  dtmf-relay rtp-nte sip-notify
> >  codec g711ulaw
> >  no vad
> > !
> > dial-peer voice 2 voip
> >  description **Incoming SIP Trunk - Voip.ms**
> >  translation-profile incoming voip.ms
> >  session protocol sipv2
> >  session target ipv4:10.50.1.2
> >  incoming called-number 5856786019
> >  dtmf-relay sip-notify
> >  codec g711ulaw
> >  no vad
> > !
> > dial-peer voice 20 pots
> >  destination-pattern 5.T
> >  direct-inward-dial
> >  no sip-register
> > !
> > telephony-service
> >  max-ephones 10
> >  max-dn 10
> >  ip source-address 10.50.1.2 port 2000
> >  system message Cisco CME 8.1
> >  cnf-file location flash:
> >  cnf-file perphone
> >  time-zone 12
> >  max-conferences 8 gain -6
> >  dn-webedit
> >  time-webedit
> >  transfer-system full-consult
> >  secondary-dialtone 9
> >  create cnf-files version-stamp Jan 01 2002 00:00:00
> >
> > ephone-dn  1  dual-line
> >  number 4005 no-reg primary
> >
> > ephone  1
> >  device-security-mode none
> >  mac-address 001E.7AC5.896A
> >  type 7961GE
> >  button  1:1
> >
> >
> > Regards,
> > Jay Stants
> > jaystants at rogers.com
>



-- 
duy
CCIE #27737 Voice
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110712/d2a1e47e/attachment.html>