[cisco-voip] 2 Queries !

[Paul Wozney]

On Mon, Mar 14, 2011 at 05:43, Jim McBurnett <jim at tgasolutions.com> wrote:

> Show ephone phone-load


Does *show ephone phone-load *show the actual phone load, or just what the
CME thinks each phone should have?  For example, if there is a valid
registered phone but the phone-load in telephony-service for that device was
configured incorrectly.

I didn't realize this command existed, and in the past I've used wget to
manually pull the current version from each phone registered to CME.  Go
figure there's an easy way.

---
Paul Wozney
Network Consultant
phone: +1 604-629-9975
toll free: +1 866-748-0516
email: paul at wozney.ca
web: http://wozney.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110314/15cd2137/attachment.html>