[cisco-voip] 2 Queries !

[Jim McBurnett]

Paul,
It shows the actual phone version in use.
Jim

From: Paul Wozney [mailto:paul at wozney.ca]
Sent: Monday, March 14, 2011 1:51 PM
To: Jim McBurnett
Cc: Paul; Cisco Voip; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2 Queries !

On Mon, Mar 14, 2011 at 05:43, Jim McBurnett <jim at tgasolutions.com<mailto:jim at tgasolutions.com>> wrote:
Show ephone phone-load

Does show ephone phone-load show the actual phone load, or just what the CME thinks each phone should have?  For example, if there is a valid registered phone but the phone-load in telephony-service for that device was configured incorrectly.

I didn't realize this command existed, and in the past I've used wget to manually pull the current version from each phone registered to CME.  Go figure there's an easy way.

---
Paul Wozney
Network Consultant
phone: +1 604-629-9975
toll free: +1 866-748-0516
email: paul at wozney.ca<mailto:paul at wozney.ca>
web: http://wozney.ca<http://wozney.ca/>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110315/b087d906/attachment.html>