[cisco-voip] 2 Queries !

[Nick Matthews]

Check out the auto-line commands, they may be able to help you with the
headset issue.

-nick

On Tue, Mar 15, 2011 at 2:13 PM, Jim McBurnett <jim at tgasolutions.com> wrote:

> Paul,
>
> It shows the actual phone version in use.
>
> Jim
>
>
>
> *From:* Paul Wozney [mailto:paul at wozney.ca]
> *Sent:* Monday, March 14, 2011 1:51 PM
> *To:* Jim McBurnett
> *Cc:* Paul; Cisco Voip; cisco-voip at puck.nether.net
>
> *Subject:* Re: [cisco-voip] 2 Queries !
>
>
>
> On Mon, Mar 14, 2011 at 05:43, Jim McBurnett <jim at tgasolutions.com> wrote:
>
> Show ephone phone-load
>
>
>
> Does *show ephone phone-load *show the actual phone load, or just what the
> CME thinks each phone should have?  For example, if there is a valid
> registered phone but the phone-load in telephony-service for that device was
> configured incorrectly.
>
>
>
> I didn't realize this command existed, and in the past I've used wget to
> manually pull the current version from each phone registered to CME.  Go
> figure there's an easy way.
>
>
>
> ---
>
> Paul Wozney
> Network Consultant
> phone: +1 604-629-9975
>
> toll free: +1 866-748-0516
> email: paul at wozney.ca
> web: http://wozney.ca
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110315/3ea7e26d/attachment.html>