[cisco-voip] callInfo(displayInfo) lost during call

[Wes Sisk]

That issue is being tracked under:
CSCtl88912    Calling name is stripped out when there is a Tcl 
Application involved

Regards,
Wes

On 3/15/2011 3:52 PM, Wes Sisk wrote:
> In what context?
>
> I was recently involved in a discussion about 
> app_fax_detect.2.1.2.3.tcl.  Calls flowing through this application 
> lost calling party name.  In the investigation we discovered that name 
> is not transported between IOS and TCL via the Application Frame 
> Work.  DNIS and ANI are but not name.  There was also some special 
> work required if the ISDN line depended on name presentation via 
> Facility IE.
>
> All that is to say you may need to discuss in a forum specific to the 
> program language and environment you are attempting to use.
>
> Regards,
> Wes
>
> On 3/15/2011 4:20 AM, Witold Bulak wrote:
>> I'm working on script that calls with out-bound dial peer, I am using
>> this commands:
>>
>>   set callInfo(displayInfo) "hello"
>>   set callInfo(originationNum) $DialerNumber
>>   set callInfo(destinationNum) $DestinationNumber
>>
>> leg setup 0 callInfo leg_incoming
>>
>> Then call is made but callInfo(displayInfo) not shows, do you know
>> where could be problem?
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip