[cisco-voip] Anyone tried to run Unity Connection 1.2 SCCP with CallManager 8.5(1)

[Lelio Fulgenzi]

You probably know this already, but to go from 4.x to 8.x with DMA, I'm pretty sure you need to do a 'bridged' upgrade via 7.x (I think that's what it's called). 

This is because the last DMA is for v7. Licensing will give you licenses fir the purpose of this upgrade. 





Sent from my iPhone

On May 5, 2011, at 6:10 PM, "Jason Aarons (AM)" <jason.aarons at dimensiondata.com> wrote:

> For a short period of time I’d like to run Unity Connection 1.2(1) which has SCCP ports with CallManager 8.5(1).  Unity Connection 1.2 isn’t supported anymore, we are migrating to Unity Connection 8.5(1) but I wanted to do CallManager 4x to 8x upgrade the first night, and Unity Connection 1.2 to 8.5 upgrade the second night. All new hardware so using DMA and COBRAS.
> 
>  
> 
> http://www.cisco.com/en/US/docs/voice_ip_comm/connection/compatibility/matrix/cucsccpmtx.html
> 
> 
> 
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110505/a482484e/attachment.html>