[cisco-voip] Incoming calls from PBX to CUCM 7.1 not complete

[ATIENZA, Gonzalo]

Hi,

 

You could check the CSS for incoming calls applied to that GW (also make
sure the ip address from the GW is the right one).

 

As far as I know you can only see those debugs through CUCM traces.  You
can also capture packets on the node where you are sending the call,
retrieve the .cap file and analyze it.

 

Regards.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of sheref hf
Sent: lunes, 23 de mayo de 2011 11:29 a.m.
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Incoming calls from PBX to CUCM 7.1 not complete

 


Hi all,
 
I have CUCM 7.1 and 4 PBX connected with CUCM as H.323 GW
 
3 PBX working well for calls between IP Phones and Analog Phones
 
the Fourth one : I can Call analog phones from IP Phones ..... but from
analog phones I can't call IP Phones ....???
 
what is the problem
 
Is there any way to debug call that inbound or outbound from CUCM to be
sure that the problem isn't from my side ....????

 

 

BR,

 

Sherif 

Network Engineer

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110523/9e721cac/attachment.html>