[cisco-voip] CER switchport info..

[Aman Chugh]

Hi Ed,

I would check CER 7.1 release notes before adding the new switch into CER
to see if it is listed as a supported switch in it or not. I ran into an
issue with 4510 R+E not supported on CER 7.1.

Regards,
Aman

On Mon, Nov 7, 2011 at 1:16 PM, Ed Leatherman <ealeatherman at gmail.com>wrote:

> CER 7.1
>
> Is there a way to get the switchport/ERL mappings from a switch out of
> CER if the switch was taken offline? Is this information lost if CER
> can't do a discovery on a switch?
>
> I have a situation where a 3750 stack was removed and replaced with a
> 4510/sup7, and no one tried to get a export of the CER ERL's for it
> before they did that. Now the new switch comes up as unsupported in
> CER, and there is nothing listed for it under the switchports ERL
> membership page. I kinda think it wiped out the old ERL mappings in
> the process, but figured I would ask.
>
> I want to try to delete the switch out of CER and recreate it to see
> if that will fix the compatibility problem, but i don't want to lose
> any info that (may) be still in the database for it.
>
> --
> Ed Leatherman
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111107/dc9f7a55/attachment.html>