[cisco-voip] MoH with H323, MTP checked

[Ahmed Elnagar]

Hi all;

 

I have a h323 gateway for PSTN calling through E1, I have configured MRG and
MRGL so that PSTN callers put on hold should hear MOH; however they don't

 

I have MTP required checked and MRGL points to a MTP device that is
configured on the same gateway "with same IP address for bind h323 and SCCP"

 

I can see the call when put on hold that the hold leg is pointing to
0.0.0.0; when I change the MTP device to CUCM it works fine.

 

Any ideas?

 

Regards,

Ahmed Elnagar | Unified Communication Team Leader | CCIE #24697, Voice

Description: Description: MS Green

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111128/cefd2e6e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2768 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20111128/cefd2e6e/attachment.jpg>