[cisco-voip] Now, 7206

[Joseph Mays]

Well, this sort of thing keeps happening. Now, I'm working on a Cisco 7206 running c7200-is-mz.123-22.bin. The feature navigator is quite clear that qos and autoqos-voip are supported on this router.

Go to global config, enter "mls qos" to enable qos -- invalid input at global config.

==========
gw1.armplc#show ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(22), RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 24-Jan-07 20:17 by ccai
Image text-base: 0x60008AF4, data-base: 0x61D44000

ROM: System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMENT SOFTWARE
BOOTLDR: 7200 Software (C7200-IS-M), Version 12.3(22), RELEASE SOFTWARE (fc2)

gw1.armplc uptime is 3 weeks, 2 days, 13 hours, 42 minutes
System returned to ROM by power-on
System image file is "slot0:c7200-is-mz.123-22.bin"

cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of memory.
Processor board ID 29496245
R7000 CPU at 350MHz, Implementation 39, Rev 3.2, 256KB L2 Cache
6 slot VXR midplane, Version 2.7

Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.

PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb0_mb1 has a total of 470 bandwidth points.
This configuration is within the PCI bus capacity and is supported.

PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 380 bandwidth points
This configuration is within the PCI bus capacity and is supported.

Please refer to the following document "Cisco 7200 Series Port Adaptor
Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
for c7200 bandwidth points oversubscription and usage guidelines.


2 FastEthernet/IEEE 802.3 interface(s)
31 Serial network interface(s)
1 ATM network interface(s)
1 Channelized T3 port(s)
125K bytes of non-volatile configuration memory.

20480K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
4096K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102

gw1.armplc#config
Configuring from terminal, memory, or network [terminal]? t
Enter configuration commands, one per line.  End with CNTL/Z.
gw1.armplc(config)#mls qos
                       ^
% Invalid input detected at '^' marker.

gw1.armplc(config)#exit
gw1.armplc#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110902/fd06971a/attachment.html>