[cisco-voip] PUT Part numbers for Unity to Unity Connection 8.5 ugprade?

[Matthew Saskin]

Assuming the customer has UCSS (which they likely do if support is
processing the request) I see the appropriate part number via the ordering
guide as 'UNCN8-UTYMIG-K9='.  I know this applies to new orders, not sure if
this would be the same part number used within PUT.

Licensing should then be able to re-host from Unity to UCXN.

Matthew Saskin
msaskin at gmail.com
203-253-9571



On Tue, Sep 27, 2011 at 4:23 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

> Cisco (cs-support) is manually processing a PUT order, but they don’t know
> the part numbers.****
>
> ** **
>
> I usually browse for the part numbers after entering the contract number,
> and don’t have them memorized myself.  ****
>
> ** **
>
> What would be the PUT part numbers for a customer is upgrading Qty 2
> 7835-H3 (Customer provided HP DL380G5) servers from Unity Unified Messaging
> 5.0 (with Exchange) (with failover) to Unity Connection 8.5 (HA)?  I can’t
> seem to find this info on cisco.com .****
>
> ** **
>
> ** **
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20110927/89c186b2/attachment.html>