[cisco-voip] t.38

[Ted Nugent]

Possibly, depending how your vg224s and PSTN gateways are configured...
Last I knew VG224 only supports T.38 NSE, not standards based T.38 so be
careful of that. Changing the fax protocol should be a coordinated effort
between the PSTN gateway and the Analog gateways to make sure nothing
breaks.

Here's a good writeup on the supported fax protocols with sample configs.

http://www.icciev.com/1/post/2011/9/adding-vg224-to-cucm-80-as-sccp-or-mgcp-gateway-differences-and-configurations-part-1.html




On Fri, Aug 31, 2012 at 3:56 PM, Scott Voll <svoll.voip at gmail.com> wrote:

> I have faxes running through VG224's on my network.  if I turn on t.38
> support will that brake them?
>
> Thanks
>
> Scott
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120831/e8a135f6/attachment.html>