[cisco-voip] Reset HP iLO on CUCM Server Remotely?

[Wes Sisk]

when last i checked we couldn't even do it from root.  we had to power down the servers physically, disconnect power, let capacitors discharge, and then power back up.  that's been a day or two (year or three?) though.

/wes

On Feb 2, 2012, at 9:06 AM, Matthew Loraditch wrote:

Is there any way to do this from the CLI or can I get TAC to do it with root access? I have a non responsive iLO and getting after hours console access to this server is not an easy task.
I know you can do it if you have a normal Windows or Linux server.
Thanks!
Matthew G. Loraditch - CCVP, CCNA, CCDA

1965 Greenspring Drive
Timonium, MD 21093

voice. 410.252.8830
fax.  410.252.9284    

Twitter  |  Facebook  | Website  |  Email Support
 

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120202/76fffaa9/attachment.html>