[cisco-voip] Corporate Directory - host not found - Reach out to the Puck

Isamar Maia isamar at gmail.com
Fri Feb 3 03:56:39 EST 2012


Same problem here. "Software reset"  is your friend.

Isamar


2012/2/3 Thomas Bader <tbader at netcologne.de>:
> ... had that in production environment after upgrading from 7.x to 8.5 (just
> on a single phone), factory reset helped ...
>
>
>
>
>
>
> Weird stuff on my home lab. My 7945, 7970 and 7961G-GE phones all show
> Corporate Directory as host not found … and I have WEB enabled for the
> phones, but cannot web into them http://ip>phone.addr/
>
>
>
> Unity Connection is not running and Due to cpu and avail memory I can only
> run 1xCUCM/1xUCCX Premium/1xWin2003Svr/1xWinXp workstation for CAD and ip
> communicator testing.
>
>
>
> Not using DNS and there is no domain Config on cucm.
>
> No LDAP integration
>
> I reset/restarted tomcat in Serviceability
>
> I reset/restarted TVS in Serviceability
>
> Have device pool, dialplan and other essentials set up on cucm so my UCCX
> lab can function.
>
> Even rebooted the publisher
>
> In OS admin is regenerated the TVR certs
>
> In command line I ran “Show itl” and TVS certs are registered and in sync
>
> The URL for Directory services is in the enterprise services section
>
> I have no firewall between the router that’s the dhcp server and the phones
>
> I do have a win2003 server acting as my smtp, dns, domain server but cucm is
> not using dns
>
> The phones work, they have a local
>
> 2811 is the Dhcp server
>
> The phones communicate, the scripts I am writing do work with the phones.
>
> I removed the secure URLs from the enterprise services section as suggested
> from some of the blogs on CCO Communities.
>
> My 7945, 7970 and 7961G-GE phones all show Corporate Directory as host not
> found
>
> I do have routing turned on in my 2811 vgw. The phones see my publisher as
> the primary tftp server
>
> I have looked over and over through all the blogs and searched Cisco and I
> think I covered just about everything.
>
>
>
> This is NFR branded software:
>
> System version: 8.6.2.20000-2   VMware Installation: 1 vCPU Intel(R) Xeon(R)
> CPU E3113 @ 3.00GHz, disk 1: 80Gbytes, 4096Mbytes RAM
>
>
>
> 7945 firmware - SCCP45.9-2-1S
>
> 7970 firmware - SCCP70.9-2-1S
>
> 7961G-GE - firmware - SCCP41.9-2-1S
>
>
>
> I am upgrading to 9-2-3 on all three phones see if that helps.
>
>
>
> What else am I missing?
>
>
>
> Somewhat embarrassing but I wanted to reach out to the puck see what comes
> back/
>
>
>
> Next will be to capture packets on the end of the phone..
>
>
>
>
>
> TIA J
>
>
>
> Greg
>
>
>
>
>
>
>
>
> This message w/attachments (message) is solely for the use of the intended
> recipient(s) and may contain information that is privileged, confidential or
> proprietary. If you are not an intended recipient, please notify the sender,
> and then please delete and destroy all copies and attachments, and be
> advised that any review or dissemination of, or the taking of any action in
> reliance on, the information contained in or attached to this message is
> prohibited. Unless specifically indicated, this message is not an offer to
> sell or a solicitation of any products.   --
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Isamar Maia
Cel. VIVO SSA:  (55) 71-9146-8575
Cel. TIM SSA: (55) 71-9185-5264
Fixo:  (55) 71-4062-8688
日本: +81-(0)3-4550-1212
Skype ID: isamar.maia


More information about the cisco-voip mailing list