[cisco-voip] Sending Calling Party type/plan from CallManager

[Jason Aarons (AM)]

ClusterEurope-PhoneA-7965 with External Mask +442075562100 goes across ICT(SIP) to ClusterUSA then out H323 gateway.  Debug isdn on Cluster USA h323 gateway shows the calling party type/plan as unknown/unknown. AT&T  says that is the problem and to fix CallManager.  I'd rather not do IOS Translation Profiles, but not sure what the "fix" would be in CallManager.  How do I tell outbound calls from phones should send calling party type/plan as international  across Intercluster Trunk (SIP).


The AT&T switch is only passing 10 digits along of the calling party number.  For example my cell phone should show +442075512100 (this is my desk phone in our London UK Office, Country code +44), instead Sprint is receiving +4420755121 (10 digits) from ATT. ATTs says the fix is to have CallManager send the Calling Party Number with type:ISDN plan:International.

                Protocol Profile =  Networking Extensions
                0xA11902013402010080114C4F4E205465737420312C446964617461
                Component = Invoke component
                        Invoke Id = 52
                        Operation = CallingName
                                Name Presentation Allowed Extended
                                Name = LON Test 1,Didata
        Calling Party Number i = 0x0081, '442075562100'        <<<<<<<<<--------------7965 with Mask +442075562100
                Plan:Unknown, Type:Unknown   <<<<<--------------------Problem
        Called Party Number i = 0x80, '19043383245'
                Plan:Unknown, Type:Unknown
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20120219/b8242d86/attachment.html>